Telephone : 02380 98703 0Fax : 02380 98703 9Email : firstname.lastname@example.orgWeb : www.pce-instruments.com/english/?
Article archive for PCE Instruments UK Ltd;
PCE Instruments have added a new pyrometer to their existing range of low-cost basic test instruments. The pyrometer can measure temperatures of up to 380 °C on surfaces, at an accuracy of ±2 %.
PCE Instruments added a new model to their existing range of roughness testers. The PCE-RT 2000 measures the roughness parameters Ra, Rq, Rsm, Rsk, Rz, Rt, Rp, Rv and Rc. The numerical values and graphics are shown on a large OLED display.
PCE Instruments added a new model to their existing range of magnetic stirrers. The special feature of the PCE-MSR 350 is the heater that can heat the stirred aqueous liquid up to 230 °C.
PCE Instruments have introduced a new highly accurate ISFET pH meter with different probes for different applications in laboratories, in the industrial sector and many many more.
The PCE-PDA series is a series of manometers to measure the pressure of gases within the ranges of ±200 Pa, ±2kPa, 20 kPa, depending on the model.
The latest product launch by PCE Instruments is a multifunctional device that measures the air temperature by means of infrared technology or by a K-type thermocouple, as well as the wet bulb temperature, the dew point and the humidity in the air.
PCE Instruments just launched a new wind, volume flow, air humidity and temperature, lux and air pressure meter. The meter shows the measured value as well as the MIN and MAX values.
The PCE-MA 200 moisture balance can weigh and test the moisture of samples of up to 200g, with a resolution of 1mg / 0.001g / 0.01 %. The sample is dried to find out how much moisture it contained, based on the weight difference.
PCE Instruments recently launched a new industrial borescope / videoscope with a semi-flexible cable and 4-way articulation, called PCE-VE 800. The adjustable LED illumination enables users to do 80° visual inspection in dark areas.
PCE Instruments included three new highly accurate sound level meters to their range of products in summer 2017. One of them is the class 1 digital noise meter PCE-432. This sound meter is equipped with an integrated GPS module for the GPS time function. It can do A, B, C and Z frequency weightings and fast, slow and impulse time weightings.
PCE Instruments’ new hand-held digital refractometers are equipped with a microprocessor and an automatic temperature compensation system. These refractometers stand out by their high accuracy, ease of use.
The gloss tester PCE-IGM 100 is frequently used in quality control where it is highly important that surfaces have the same structure, i. e. the same surface characteristics. This gloss meter with 3.5" TFT touch screen and different geometries is quick and easy to use.
The air flow meter (wind speed alarm controller) PCE-WSAC 50 can emit a visual and audible alarm when certain pre-set values are reached or exceeded. Even the smallest changes in the wind speed are recognised.
The digital crane scales PCE-CS 10000N show heavy weights in kg or lbs. The maximum weighing capacity is 10000 kg, with a resolution of 5 kg.
The new PCE-DAL logger will have several sensors and therefore be able to measure vibration, light, barometric pressure, temperature, as well as humidity.
PCE Instruments’ very versatile PCE-VE 300N series of borescopes for industrial and other applications has been increased by one more professional inspection camera called the PCE-VE 390N.
The PCE-VE 700 visualisation system can be ordered with different interchangeable probes for different applications in, for example, industrial production processes, energy and power stations, automotive, aerospace or research and development.
The PCE-P43 3-phase power quality analysers with a Modbus interface and DIN rail mounting are available in different configurations, i. e. the current input can be selected.
PCE’s PCE-DDM series includes the devices PCE-DDM 3, PCE-DDM 5, PCE-DDM 10, PCE-DDM 20 and PCE-DDM 50.
The digital durometer or hardness tester PCE-DSD-D is used to measure the surface hardness of medium-hard rubber, hard plastic and semi-rigid plastic.