Gen3 increases CIL’S capabilities

21 February 2011

Mb-Tech PCB Cleaner NC 25
Mb-Tech PCB Cleaner NC 25

The company has added Gen3 Systems’ equipment to their line.

Gen3 Systems Contaminometer (CM Series) CM11+, a bench-top system, and Mb-Tech PCB Cleaner NC 25 have been introduced to Custom Interconnect Limited’s production line.

Gen3 Systems has over 500 CM11+ units installed and commissioned across the world. Contaminometers are used to measure the amount of ionic contamination, usually referred to as cleanliness level, in accordance with IPC/ANSI-J-STD001 and UK DEF-STD and other international specifications. The instruments are also commonly referred to as ROSE (Resistivity Of Solvent Extracted) or SEC (Solvent Extract Conductivity) testers.

CIL have also purchased an MB Tech NC25 cleaning system. MB-Tech’s range of products meets all the needs and specifications of electronic boards manufacturers (stencils, PCB after reflow, coated boards stripping, maintenance parts such as solder pallets or oven condenser) and since 2002, they have also been able to satisfy the quality needs of the semiconductor industry.

Mb-Tech equipment is designed in order to respond to three essential criteria; efficiency, low running costs, and environmental respect.

Efficiency is achieved through the development of cleaning techniques adapted to the final products. Low running costs come thanks to the use of a filtration patent which increases the life time of the cleaning product, through a closed-loop rinsing process and by reducing the electricity consumption with the help of innovative techniques used in the drying process.

Respect for the environment is achieved through the use of a water-based cleaning product and the waste-free closed-loop water process.

Rob Ronan, Production Engineering Manager of Custom Interconnect Limited, commented: “We had considered many different options and explored the market place extensively when it came to replacing our existing cleaning system. The Mb tech NC25 was perfectly suited to our current and potential future cleaning demands and due to the support offered in the UK for this machine by Gen3, it was decided that the NC25 along with the CM Contaminometer was the ideal complete cleaning solution for CIL.”


Contact Details and Archive...

Print this page | E-mail this page