Sponsored Article

iLS DC power supplies offer all the advantages of digital control for mission-critical measurement

22 September 2021

Advanced Energy’s iLS600 power supplies, available from Relec Electronics, are ideal for semiconductor & other production testing applications
Advanced Energy’s iLS600 power supplies, available from Relec Electronics, are ideal for semiconductor & other production testing applications

Programmable DC power supplies by Advanced Energy deliver ultra-accurate set point & precise measurement to bring high-quality digital design & remote sensing to ATE, mil-aero, EV & semiconductor testing. The Artesyn iLS Series is available now from Relec Electronics.

Full digital design means that the iLS600, iLS600-R and iLS1500 programmable DC power supplies are based on the latest technologies, architectures and components to ensure fast, reliable, repeatable performance in some of the most demanding environments.

Patented wireless remote sensing allows DC power to be regulated at the point of load (PoL). This eliminates one of the major headaches of production testing, as output wires between the power supply and load can be responsible for a drop in voltage, or can impede performance by picking up noise or creating ground loops.

The 600 W and 1500 W power supplies have five voltage ranges (from 0 to 30 V up to 0 to 400 V). The iLS Series provides highly accurate set point and precision measurement for voltage source, current source and is fully adjusted from 0 to max voltage or 0 to max current.

The power supplies can be used in semiconductor testing, automatic testing equipment (ATE) for production testing, avionics and military testing, EV testing, data loggers and functional testers. The 12-bit D/A and A/D converters are also suitable for R&D, product development and circuit design in laboratories and universities.

The iLS600 and iLS1500 have a suite of easy to use control features, including front panel manual control, Ethernet (LXI), USB, analogue and LabVIEW drivers. Master/slave configurations use up to four units in parallel or two units in series, for 600V max. The power supplies can be field-calibrated or special scripts and firmware can be uploaded.

Safety features include adjustable over-voltage and over-current protection.

The iLS series can be modified and customised on request (dependent on volume, NRE and compliance testing considerations).

The iLS600, iLS600-R and iLS1500 DC power supplies are available to order now from Relec Electronics.


Contact Details and Archive...

Print this page | E-mail this page