EtherCAT interface option added to programmable DC power supply series

08 January 2020

LA030 GENESYSplus 1.7kW_580x280

TDK-Lambda has announced the introduction of an EtherCAT interface option to all models in its GENESYS+™ series of programmable DC power supplies. EtherCAT is an industry standard version of Ethernet for control automation technology, offering greater functional safety, flexibility & ease of use, lower cost & faster response times. The EtherCAT option can be used to remotely program, measure & check status of the power supply over an EtherCAT network.

EtherCAT further extends the number of available user operating modes to seven, including the currently available LAN, RS-232/RS-485, USB, remote isolated analogue, ModBUS-TCP and front panel (local) interfaces. During control through the remote isolated analogue or front panel, the GENESYS+™ can still be remotely monitored through the EtherCAT interface.
 
An XML EtherCAT ESI (EtherCAT Slave Information) file can be downloaded from the application installer. Connection is made through two shielded Ethernet RJ-45 connectors on the rear panel. Software drivers are provided in the software package.
 
For more information about the full range of TDK-Lambda’s GENESYS+™ programmable power supplies, please call TDK-Lambda directly on +44 (0)1271 856600 or visit the website at: www.emea.lambda.tdk.com/uk/genesysplus


Contact Details and Archive...

Print this page | E-mail this page