Light-based positioning & navigation in industrial applications demonstrated by research project

20 August 2019

The transport system is navigated via the ceiling lighting. Dr Alexandre Bousaid, Bianca Miene (both OSRAM) & Tommy Falkowski (Fraunhofer IEM) discuss the technology (Photo - Fraunhofer IEM)_580x280.jpg

In a German Federal Ministry of Education & Research (BMBF) joint project, OSRAM, Götting, KEB Automation & Fraunhofer IEM have researched the possibilities of light-based positioning, particularly for use in industrial applications. By the end of the project, the team came to a promising conclusion: navigating by light is practical, flexible & reliable – promising great potential for Industry 4.0.

The results of the 3-year collaborative research project is a positioning system that navigates driverless transport vehicles by light through a logistics or production hall. Positioning takes place using LED lights mounted on the hall ceiling, each of which emits a clear identifier via modulated (in other words, specific pulsating) light. This modulation is completely invisible to the human eye, so no changes are necessary to the existing lighting situation.

 
Explaining the advantages of the solution, Christian Fechtelpeter, scientist at Fraunhofer IEM, commented: “Easy and flexible navigation for autonomous vehicles is possible using light-based positioning. If, in the future, we link these to the existing LED ceiling lighting, the technology could be a key driver for Industry 4.0 applications.”
 
For illustrative purposes, navigation was implemented in the modular transport system, KATE (Kleine autonome Transporteinheit = small autonomous transport unit) from the company Götting. While the standard version of the vehicle is controlled using optical guidelines and transponders installed on the floor, track guidance can now be achieved using the new system. OSRAM modified standard industrial LED lights and developed a camera-based sensor system to receive the modulated light. An in-vehicle evaluation unit developed by Götting processes the camera and other sensor data to facilitate navigation via a user interface. The inter-disciplinary development of the complete system was coordinated by Fraunhofer IEM using various methods of system engineering. The primary factors for success were the model-based specification of the overall architecture, as well as the test case planning.
 
As an application partner, KEB used its own electronic production processes to illustrate – and therefore validate – the application in use under real conditions. This shows that light-based positioning offers advantages over other navigation technologies when it is ready for market. Companies can easily use their existing lighting infrastructure. Since obstacles on the production floor do not interrupt communication between sender and receiver, navigation is largely trouble-free. The route taken by driverless transport systems can be flexibly reprogrammed, which allows processes to be streamlined and workflows smoothed.
 
The LiONS project (light sensor-based positioning & navigation services for autonomous systems) was funded from October 2015 to December 2018 by BMBF as part of the announcement of the promotion of “Sensor-based Electronic Systems for Applications for Industry 4.0 (SElekt I4.0)”.
 
Project partners:
•    OSRAM developed both the modified LED lights and the corresponding sensors for the transport vehicle.
•    Götting is developing a special evaluation module in the project for its driverless transport system KATE.
•    As an application partner, KEB used its own production processes to illustrate – and thus validate – the application in use under real conditions.
•    Fraunhofer IEM was responsible for the overall system design, as well as test case planning and coordinated the entire project.

In the sense of model-based systems engineering, the system of light-based positioning was conceived on a holistic and model-assisted basis, whereby all necessary departments were included from the beginning.
 
Further information:
Link to the project website: www.lions-lbs.de
For more information on the COMBIVERT H6 or T6 APD, please visit www.keb.co.uk

Project team LiONS - Looking back with satisfaction on three years of research: the project team with representatives from OSRAM, KEB, Götting and Fraunhofer IEM (Photo: Fraunhofer IEM).


Contact Details and Archive...

Print this page | E-mail this page