Extending the boundaries of cap stable MLCCs

17 November 2015

Design engineers looking for capacitors with a defined change of capacitance & applied voltage can now specify the VC1 range from Knowles Capacitors.

This residual capacitance range of X7R MLCCs are designed to not drop more than 50% of their cap value from the 1Vrms 1kHz value, all the way up to full rated DC voltage at room temperature.

In ceramic capacitors, generally speaking, the more stable the dielectric the lower the available capacitance value. There is often a trade-off to be made with the most stable, lowest loss, zero ageing Class 1 dielectric materials only producing low capacitance values. However, developments in materials and processing technology, plus an increased understanding of capacitor design and failure modes over time, has led to Syfer making vast improvements in MLC volumetric efficiency. The ceiling of, say, 56nF for a 1kV 1812 case size part 10 years ago has increased to 180nF today. 

The VC1 range can be operated continuously at full rated voltage, but if de-rated will maintain a larger percentage of their original capacitance value. For example, if operated at 80% of the rated voltage the capacitance value will reduce to something near 60%.

Defined capacitance value in case sizes from 0805 to 3640, with voltage rating up to 3kV. Ideal for power supplies, capacitance critical circuits, smoothing circuits and EMI suppression.


Contact Details and Archive...

Print this page | E-mail this page